Sensors & Transmitters
Controllers & Indicators
Drivers & Amplifiers
Heaters & Coolers
Communication & I/O
Accessories
 
Home > Products
 
 
 
   
 
  F4 Process Controller

  • Saving space with the shortest length behind panel.
  • 0.4" LED display showing SV/PV at a glance.
  • Front panel protection with NEMA-4/IP65. (The attached packing is
    required.)
  • Higher sampling (100ms) result in higher control performance.
  • Protect the control object from thermal shock (rapid temperature change) with the excellent ramp rate facility.
  • Protect the heating element from excess current during initial power-up.
  • Free GUI PC control software (beta)

 
   
 
  VT26 Fuzzy Enhanced Pid Controller

  • T/C, RTD, Linear Input selection.
  • Fuzzy enhanced PID Control.
  • Auto / Manual Bumpless Transfer.
  • Two alarm output.
  • Standby and Latch mode can be combined with 8 different alarm
    functions.
  • Ramp to setpoint and soak functions.
  • Soft- start function.
  • Universal power supply : 90-264V AC, 50/60Hz.

 
   
 
  VD Series Low Cost Temperature Controllers

  • T/C, RTD, Linear Input selection.
  • P, PD, ON/OFF control mode selection.
  • Universal Power supply : 90-264V AC, 50/60Hz. DC 24V is also available for option. 3 Alarm output. (note 1)
  • Standby and Latch mode can be combined with 8 different alarm
    functions.
  • Retransmission or RS-485 communication(MODBUS RTU) is available
    for option.

 
   
 
  VT30 Programmable Controller

  • T/C, RTD, Linear Input selection.
  • Fuzzy enhanced PID Control.
  • Auto / Manual Bumpless Transfer.
  • Two Alarm output with 9 different alarm functions.
  • Two 8-segment (Ramp & Soak) profiles.
  • Universal Power supply : 90-264V AC, 50/60Hz. DC / AC 24V is also.
    Event Alarm.

 
   
 
  VM96 Valve Controller

  • T/C.RTD.Linear input selection.
  • Open Loop. Close Loop Control selection.
  • Auto/manual Bumpless Transfer.
  • LED Bar indicator to show valve position.
  • RS-485 communication with MODUBS RTU mode is available for option.
  • Standby and Latch mode can be combined with 6 different alarm
    function.
  • 2 alarm output.
  • Universal Power Supply : 90-264V AC, 50/60Hz. DC / AC 24V is also
    available for option.
  • Fuzzy enhanced PID control.
  • Note1: 2nd and 3rd Alarm are available for option.

 
   
 
  VT9621 Fuzzy Enhanced PID Dual Channel Controller

  • Independent dual input channel.
  • T/C, RTD, Linear input selection.
  • Fuzzy enhanced PID control.
  • Auto / Manual Bumpless Transfer.
  • Two alarm output.
  • Ramp function.
  • Soft- start function.
  • Auxiliary DC24V power supply to drive transmitter.
  • Universal power supply : 90-264V AC, 50/60Hz.

 
   
 
  MPC Microprocessor Based Module Type PID Controller

  • DIN rail mounting, Compact size.
  • Universal input/output selectable.
  • 10 samples per second.
  • 4 independent LEVEL PID.
  • Ramp/Soak program (16 segments profile with loop / link / jump function).
  • Soft-Start function.
  • Digital communication with MODBUS RTU Protocol.
  • All parameters can be easily configured by PC with URC-1020 interface cable or EzPro hand held programmer.
  • PV bias / PV ratio correction.

 
   

    1 Page. 1/1
Copyright 2009© Accuthermo Technology Corp.   45772 Bridgeport Dr., Fremont, CA 94539, USA   Tel : (408) 685-0993      Mai l : service@accuthermo.com