|
|
| |
|
| |
|
|
|
|
EDAM-8510 (Isolated RS-422 / RS-485 repeater) |
 |
- Automatic internal RS-422/485 bus supervision
- No external flow control signals required for RS-485
- Minimum 3000 VDC isolation protection
- Transient suppression on RS-485 data lines
- Supported baud rate up to 115.2 Kbps
- Reach distance up to 4000 feet (1200 m)
- Reserved space for termination resistors
- Power and data flow LED indicator for troubleshooting
- Power requirement : +10 to +30 VDC
- Mounts easily on DIN-rail or panel
|
 |
|
|
|
| |
|
| |
|
|
|
|
EDAM-8520A (Isolated RS-232 to RS-422 / RS-485 converter) |
 |
- Automatic direction flow control on RS-485
- Auto switching for RS-232 to RS-422 or RS-485(jumperless)
- Auto switching baud rate up to 115.2 Kbps
- Minimum 3000 VDC isolation protection
- Transient suppression on RS-485 data lines
- Networking up to 4000 feet
- Reserved space for termination resistors
- Power and data flow LED indicator for troubleshooting
- Power requirement: +10 to +30 VDC
- Mounts easily on DIN-rail or panel
|
 |
|
|
|
| |
|
| |
|
|
|
|
EDAM-8530 (Isolated USB to RS-232 / RS-422 / RS-485 converter) |
 |
- USB 1.1 Compliant
- Automatic direction flow control on RS-485
- Full-duplex RS-232/RS-422 support
- RS-232 RTS & CTS signals support
- Minimum 3000 VDC isolation protection
- Transient suppression on RS-485 data lines
- Automatically switch USB signal to RS-232/RS-422 or RS-485
(jumperless)
- Auto switching baud rate up to 115.2 Kbps
- Reserved space for termination resistors
- Power and activity indicator for troubleshooting
- Driver support for Windows 95/98/ME/2000/XP, Linux
- Power requirement: USB bus power
- Mounts easily on DIN-rail or panel
|
 |
|
|
|
| |
|
| |
|
|
|
|
EDAM-8531 (Isolated USB to RS-422 / RS-485(TX,RX,RTS,CTS) converter) |
 |
- USB 1.1 Compliant
- Automatic direction flow control on RS-485
- Full-Duplex RS-422 support
- RTS & CTS handshake signals support for RS-422
- Minimum 3000 VDC isolation protection
- Transient suppression on RS-485 data lines
- Automatically switch USB signal to RS-422 or RS-485 (jumperless)
- Auto switching baud rate up to 115.2 Kbps
- Reserved space for termination resistors
- Power and activity indicator for troubleshooting
- Driver support for Windows 95/98/ME/2000/XP, Linux
- Power requirement: USB bus power
- Mounts easily on DIN-rail or panel
|
 |
|
|
|
| |
|
| |
|
|
|
|
EDAM-8012D (A/D digital input and open collector output module) |
 |
- Automatic data flow control on RS-485
- Baute rate : up to 115.2K(bps)
- Alarm function with high / low alarm output
- Programmable host watch dog timer for host failure protection
- 1-ch analog input with differential input for voltage and current
measurement
- 1-ch digital input / event counter, 2-ch open collector digital output
- Support EDAM ASCII format protocol
- Fully photo-isolation 3750Vrms
|
 |
|
|
|
| |
|
| |
|
|
|
|
EDAM-8018 (8-ch Analog / Thermal couple temperature input module) |
 |
- Automatic data flow control on RS-485
- Baute rate : up to 115.2K(bps)
- Alarm function with high / low alarm output
- Programmable host watch dog timer for host failure protection
- 6 differential and 2 single-ended or 8 differential analog input
- Support thermocouple (J, K, T, E, R, S, B, N, C) type
- Support 60 samples/second (12bit) fast sampling rate
- Thermocouple : J , K , T , E , R , S , B , N , C type
- Fully photo-isolation 3750Vrms
|
 |
|
|
|
| |
|
| |
|
|
|
|
EDAM-8060D (4-ch isolated digital input and 4-ch relay output module with LED) |
 |
- Automatic data flow control on RS-485
- Baute rate : up to 115.2K(bps)
- Programmable host watch dog timer for host failure protection
- 4-ch isolated digital input with common source and 4-ch relay output
- Support EDAM ASCII format protocol(default)
- Fully photo-isolation 3750Vrms
|
 |
|
|
|
| |
|
| |
|
|
|